搭建流量分析工具elastiflow(基于elk)

一、功能 接收网络设备的netflow或sflow报文,对网络设备的数据进行分析,从而得到协议的流量排行、下载IP排行、通信对等信息。 二、基础环境 1、安装ELK和java RHEL server 7,ELK 6.8.21用rpm安装elasticsearch、logstash、kibana 下载地址:https://www.elastic.co/cn/downloads/past-releases#elasticsearch ​ ​​rpm -ivh elasticserach-6.8.21.rpm​​​ ​​rpm -ivh logstash-6.8.21.rpm​​​ ​​rpm -ivh kibana-6.8.21-x86_64.rpm​​ 安装java 1.8.0_171或以上(安装方法网上可找到) 2、kibana配置 编辑/etc/kibana/kibana.yml server.port 5601 server.host: "192.168.11.105" server.maxPayloadBytes: 8388608 elasticsearch.url: “http://192.168.11.105:9200” i18n.locale: "zh-CN" 把kibana相关路径的权限修改​ ​​chown -R kibana:kibana /etc/kibana​​​ ​​chown -R kibana:kibana /usr/share/kibana​​​ ​​chown kibana:kibana /etc/default/kibana​​ 启动kibana​ ​​systemctl enable kibana​​​ ​​systemctl start kibana​​ 2、elasticsearch配置 编辑/etc/elasticsearch/elasticsearch.yml node.name:net-pd-1 path.data:/data/elisticsearch/data Path.logs:/data/elasticsearch/logs bootstrap.memory_lock:true network.host:192.168.11.105 http.port:9200 编辑/etc/elasticsearch/jvm.options,只改以下部分(大小为1/4 内存) -Xms64g -Xmx64g 编辑/usr/lib/systemd/system/elasticsearch.service(第一行下面添加第二行) LimitFSIZE =infinity LimitMEMLOCK=infinity 把elasticsearch相关路径的权限修改​ ​​chown -R elasticsearch:elasticsearch /etc/elasticsearch​​​ ​​chown -R elasticsearch:elasticsearch /usr/share/elasticsearch​​​ ​​chown -R elasticsearch:elasticsearch /data/elisticsearch/data​​​ ​​chown -R elasticsearch:elasticsearch /data/elisticsearch/logs​​​ ​​chown elasticsearch:elasticsearch /etc/sysconfig/elasticsearch​​ 启动elasticsearch​ ​​systemctl enable elasticsearch​​​ ​​systemctl start elasticsearch​​ 3、logstash配置 编辑/etc/logstash/logstash.yml,data和logs路径是自定义 path.data:/data/logstash/data config.reload.automatic:true config.reload.interval:3600s http.host: "192.168.11.105" http.port: 9600-9700 path.logs:/data/logstash/logs 编辑/etc/logstash/jvm.options,只改以下部分(大小为1/4 内存) -Xms64g -Xmx64g 编辑/etc/logstash/startup.options,只改以下部分(java 路径) JAVACMD=/usr/bin/java 把logstash相关路径的权限修改​ ​​​​ ​​chown -R logstash:logstash /etc/logstash​​​ ​​chown -R logstash:logstash /usr/share/logstash​​​ ​​chown -R logstash:logstash /data/logstash/data​​​ ​​chown -R logstash:logstash /data/logstash/logs​​​ ​​chown logstash:logstash /etc/default/logstash​​ ​启动logstash​ ​​systemctl enable logstash​​​ ​​systemctl start logstash​​ 三、安装过程 1、安装elastiflow 下载elastiflow:https://github.com/robcowart/elastiflow/releases/tag/v3.4.2 的tar.gz包​ ​​tar -zxvf v3.4.2.tar.gz​​​ ​​cd elastiflow-3.4.2​​​ ​​cp -r logstash/elastiflow /etc/logstash/​​​ ​​cp -r logstash.service.d /etc/systemd/system/​​ 2、elastiflow 配置 禁用/etc/logstash/elastiflow/conf.d/中不用的配置文件(文件名后添加.disabled)​ ​​10_input_ipfix_ipv4.logstash.conf.disabled​​​ ​​10_input_ipfix_ipv6.logstash.conf.disabled​​​ ​​10_input_netflow_ipv6.logstash.conf.disabled​​​ ​​10_input_sflow_jpv4.logstash.conf.disabled​​​ ​​10_input_sflow_ipv6.logstash.conf.disabled​​​ ​​20_filter_30_ipfix.logtsh.conf.disabled​​​ ​​20_filter_40_sflow logstash.conf.disabled​​​ ​​30_output_20_multi.logstash.conf.disabled​​ 编辑/etc/systemd/system/logstash.service.d/elastiflow.conf,修改以下部分(NETFLOW的IPv6部分注释掉,IPFIX协议和SFLOW协议全部注释掉) Environment= "ELASTIFLOW_GEOIP_CACHE_SIZE=12288" Environment= "ELASTIFLOW_RESOLVE_IP2HOST=true" Environment= "ELASTIFLOW_ES_HOST=192.168.11.105:9200" Environment= "ELASTIFLOW_NETFLOW_IPV4_HOST=192.168.11.105" Environment= "ELASTIFLOW_NETFLOW_IPV4_PORT=2055" 重载systemctl​ ​​systemctl daemon-reload​​ 3、logstash 修改配置 编辑/etc/logstash/pipeline.yml (仅当logstash没有其他业务) #- pipeline.id:main # path.config:/etc/logstash/conf.d/*.conf - pipeline.id:elastiflow path.config: “/etc/logstash/elastiflow/conf.d/*.conf" 编辑/etc/logstash/elatilow/conf.d/30_output_10_single.logstash.conf,在output的elasticsearch中修改此行 hosts => [ "${ELASTIFLOW_ES_HOST:192.168.11.105:9200}" ] 重启logstash​ ​​​​ ​​systemctl restart logstash​​ (用netstat -ntulp验证是否监听udp 2055端口) 4、kibana 修改配置 将elastiflow-3.4.2/kibana/elastiflow.kibana.6.7.x.json上传到kibana界面(管理→已保存对象→导入) 新建索引(管理→索引模式→创建索引模式) ,取名"elastiflow-*" (必须在启动logstash之后再添加) 5、kibana仪表板 新建仪表板,添加自己惯用的图表(以下是应用排名、客户端流量排名、服务端流量排名、会话流量排名),同时使用筛选器可以过滤出指定ip的分析结果 6、elastiflow设置(如果discover界面中的@timestamp参数慢8小时,可按此方法改正) 编辑/etc/logstash/elastiflow/conf.d/20_filter_10_begin.logstash.conf,在filter中添加 # timezone ruby { code => "event.set('index_date',event.get('@timestamp).time.localtime + 8*60*60)" } mutate { convert => [index_date", "string"] gsub => ["index_date","T([\S\s]*?)Z",""] gsub => ["index_date","-", "."] } 编辑/etc/logstash/elatilow/conf.d/30_output_10_single.logstash.conf,在output的elasticsearch中注释此行index => "elastiflow-3.4.2-%{index.date}" #index => "elastiflow-3.4.2 -%{+YYY.MM.dd}" index => "elastiflow-3.4.2-%{index.date}" 四、网络设备netflow配置模板 思科: int GigabitEthernet0/0 ip flow ingress ip flow egress ip flow-export source GigabitEthernet0/0 ip flow-export version 5 ip flow-export destination 192.168.11.105 2055 瞻博: set services flow- monitoring set interfaces ge-0/0/0 unit 0 family inet sampling input set interfaces ge-0/0/0 unit 0 family inet sampling output set forwarding-options sampling input rate 1000 set forwarding-options sampling input run-length 0 set forwarding-options sampling input max-packets-per-second 2000 set forwarding-options sampling family inet output flow-server 192.168.11.105 port 2055 set forwarding-options sampling family inet output flow-server 192.168.11.105 source-address 192.168.11.106 set forwarding-options sampling family inet output flow-server 192.168.11.105 version 5 华为/华三: sampler2 mode random packet-interval 2000 ip netstream export index-switch 32(部分华为设备默认接口索引是16位,故需要此设置) ip netstream export version 5 origin-as ip netstream export host 192.168.11.105 2055 ip netstream export source interface GigabitEthernet0/0 interface GigabitEthernet0/0 ip netstream inbound ip netstream outbound ip netstream inbound sampler 2 ip netstream outbound sampler 2 五、网络设备sflow配置模板(仅针对不支持netflow的设备) 1、logstash安装sflow插件 在 https://gems.ruby-china.com/gems/logstash-codec-sflow 下载logstash-codec-sflow插件,注意和logstash的版本适配(logstash 6.8.1需要sflow 2.1.3)。 用zip打包成logstash-codec-sflow.zip,上传到服务器的/tmp ​ ​​cd /usr/share/logstash​​​ ​​bin/logstash-plugin install file:///tmp/logstash-codec-sflow.zip​​ 安装完插件再次修改权限​ ​​chown -R logstash:logstash /usr/share/logstash​​ 2、编辑/etc/systemd/system/logstash.service.d/elastiflow.conf,把sflow取消注释(除了ipv6部分) Environment="ELASTIFLOW_SFLOW_IPV4_HOST=192.168.11.105" Environment="ELASTIFLOW_SFLOW_IPV4_PORT=6343" Environment="ELASTIFLOW_SFLOW_UDP_WORKERS=4" Environment="ELASTIFLOW_SFLOW_UDP_QUEUE_SIZE=4096" Environment="ELASTIFLOW_SFLOW_UDP_RCV_BUFF=33554432" 重载systemctl​ ​​systemctl daemon-reload​​ 3、解禁/etc/logstash/elastiflow/conf.d/中sflow配置文件(文件名后删除.disabled) ​​10_input_sflow_ipv4.logstash.conf​​​ ​​20_filter_40_sflow.logstash.conf​​ 4、编辑/etc/logstash/elastiflow/conf.d/20_filter_40_sflow.logstash.conf (sflow的node.ipaddr默认是agent ip,要改成管理ip),注释以下内容 #mutate { # id => "sflow_set_node_agent_ip" # replace => { # "[node][ipaddr]" => "%{[agent_ip]}" # "[node][hostname]" => "%{[agent_ip]}" # } #} 5、重启logstash ​​systemctl restart logstash​​ (用netstat -ntulp验证是否监听udp 2055和udp 6343端口) 瞻博sflow (例如EX4200) : ​ ​​set protocols sflow collector 192.168.11.105​​​ ​​set protocols sflow collector udp-port 6343​​​ ​​set protocols sflow interfaces ge-0/0/0.0​​​ ​​set protocols sflow polling-interval 60​​​ ​​set protocols sflow sample-rate 1000​​​ ​​set protocols sflow source-ip 192.168.11.130​​ 注意: EX系列的sflow 包含的接口索引是物理接口索引,即使流量是子接口产生的! 六、设备名和接口名映射 1、设备名 编辑/etc/hosts, elastiflow 会根据node.ipaddr来解析node.hostname。格式: 192.168.11.106 RT4 192.168.11.108 vMx-1 2、接口名 编辑/etc/logstash/elastiflow/dictionaries/ifName.yml,elastiflow 会根据node.ipaddr和ifindex来获取ifname。格式: "192.168.11.106::ifName.1": "Gi0/0" "192.168.11.108::ifName.513": "ge-0/0/0" "192.168.11.108::ifName.523": "ge-0/0/0.0" 设备名和接口名的效果图如下: 修改hosts文件和ifName.yml文件后要重启logstash生效

提供优质的网站源码大全,小程序、APP、H5、支付、游戏、区块链、商城、直播、影音、小说、公众号等源码下载。
易搜网络技术公司 » 搭建流量分析工具elastiflow(基于elk)
赞助VIP 享更多特权,建议使用 QQ 登录
喜欢我嘛?喜欢就按“ctrl+D”收藏我吧!♡